From POLYAMIDE (01) 30.04 EVR - SEMEN GROUT  - Katalog 29 0
From POLYAMIDE (01) 30.04 EVR - SEMEN GROUT  - Katalog 29 1
From POLYAMIDE (01) 30.04 EVR - SEMEN GROUT  - Katalog 29 2

POLYAMIDE (01) 30.04 EVR - SEMEN GROUT - Katalog 29

Minimum Order 1
Country Origin Indonesia
Categories Polyamide
Last Updated 13 Feb 2020
Harga
Rp 315,000 *harga belum termasuk PPN

Seller

Epoxyndo Art Lestari

Verified Supplier
1 Tahun
Address

Jl. Raya Narogong Km. 14.8 No. 99 Ciketing Udik / Marketing Office : Kota Wisata Cibubur FMR7 No. 6

Product Details Jasa/Distributor/SupplierPOLYAMIDE (01) 30.04 EVR - SEMEN GROUT - Katalog 29

DESCRIPTIONCement mix ready mix cement which has special two-stage volume expansion characteristics to compensate for shrinkage of plastics which is usually associated with cement grout.In accordance with the Specifications Corps of Engineers CRD C-621 and ASTM C-1107 ADVANTAGES• Easy to use, j
Dapatkan penawaran terbaik untuk POLYAMIDE (01) 30.04 EVR - SEMEN GROUT - Katalog 29 !
Name
Quantity
Unit
We are Online Media consists of Distributor, Reseller, Manufacture, Supplier. If you are interested to buy POLYAMIDE (01) 30.04 EVR - SEMEN GROUT - Katalog 29 cheap, please contact the Company directly.

If you are a Company who wish to sell your product,
Product Details

DESCRIPTION

Cement mix ready mix cement which has special two-stage volume expansion characteristics to compensate for shrinkage of plastics which is usually associated with cement grout.In accordance with the Specifications Corps of Engineers CRD C-621 and ASTM C-1107

 

ADVANTAGES

• Easy to use, just add water

• Good flow characteristics

• Adjustable consistency

• Rapid strength development

• Resistant to impact and vibration

• Depreciation of compensation

• High final strength

• Non-Corrosive

• Non-Toxic

 

USE

To install various applications: Anchor bolts

- For concrete repair grouting methods

- Cavities, gaps and niches.

- Supports bridge bearing bearings.

- Machine bed / base plate.

- precast concrete sections.

- Dry package application

 

MIXED

Enter the right amount of water (depending on the consistency needed) in the mixing container. Add the total contents of Semen Grouting EAL slowly while mixed. Mix continuously for 4 minutes to achieve even consistency. Use a mechanical low speed drill (400-600 rpm) by mixing the paddle or in an appropriate sized mortar mixer.

 

APPLICATION

within 25 minutes after mixing, place the nat info form from one side to avoid air entrapment. Don't vibrate Use a suitable 150-200 mm head box and maintain the grout head at all times to ensure continuous flow. Gently tapping or pulling wire chambers on one side can help the mortar flow in difficult working conditions.

 

SURFACE PREPARATION

Get rid of all dirt, oil, grease, loose material and other bond-blocking agents. The anchor bolts to be grouted must be degreased with suitable solvents. Concrete must be strong and rough to increase mechanical adhesion. Before conducting a pore, the surface must be moistened until the surface is saturated to dry.

 

FORMING

For grout that can be poured, make a form to hold grout without leaking.

Forms must be coated with a bond-breaker for easy removal.

The shape must be high enough to accommodate the grout head.

Where tight form grout is difficult to achieve, use Semen Grouting EAL in a dry package consistency.

 

TREATMENT

Wet medicine for at least 3 days with wet burlap, plastic sheet or apply curing compound.

 

LIMITATIONS

Minimum application thickness: 10 mm

If thickness exceeds 100 mm, special procedures must be taken to anticipate temperature increases. Ice water, add coarse, aggregate to the mixture, or both can be used to eliminate the rise in temperature.

Keep the material and the temperature of the media around 300C.

Variations in cement can cause color differences in the mortar.

 

 

HEALTH AND SAFETY

Please pay attention to the precautionary notice displayed on the container. Spray in a well-ventilated condition. Do not breathe or breathe fog. Avoid skin contact. Spills on the skin must be removed immediately with an appropriate cleanser. Soap and water. We should flush eyes with water and seek medical help immediately.